PASSO Hydraulic Oil AW-68

Product Description:

Passo Hydraulic Oil AW-68 is a high-quality viscosity index, anti-corrosive, and anti-wear Hydraulic Oil. It is meticulously formulated with a Premium-VI base stock and additives of a superior quality. It encompasses high standards anti-corrosive inhibitor in combination with foam depressant.

Characteristics of Passo Hydraulic Oil AW-68:

  • Passo Hydraulic Oil AW-68 has the following characteristics:
  • Anti-corrosive and anti-wear hydraulic oil
  • Highly resistive against oxidation, rusting, sludge and foaming tendencies
  • Increased life of equipment
  • Shield equipment and associated parts from moisture and prevents them from being corrode
  • Decrease maintenance cost
  • Prevents filter blockage by exceptional filter ability

Application:

After an expert consultation and recommendation, only the best industrial lubricant can be selected and used for multiple applications. Passo Hydraulic Oil AW-68 is highly advised for hydraulic applications of all stationary and mobile equipment. It can also be used in pumps, and compressors operating at high pressure and temperature. Moreover, it is suitable to use hydraulic system of excavators, cranes, and industrial earth moving machines. Passo Hydraulic Oil AW-68 has exceptional filterability, state of the art oil seal compatibility and superior thermal stability guaranteeing extended life.        

Properties and Specifications:

Please find the properties and specifications of Passo Hydraulic Oil AW-68 in the following table.

Serial No.

Properties

Test Procedure

Typical Values

 

ISO Grade

 

32

46

68

100

1.        

Specific Gravity @ 60/60 0F

ASTM  D-4052

0.875

0.878

0.882

0.886

2.        

Flash Point, Cleveland  Open  Cup ᵒC 

ASTM D-92

219

223

227

234

3.        

Kinematic Viscosity @ 100 0C                            mm2 /s               

ASTM D-445

5.09

6.29

8.05

10.14

4.        

Kinematic Viscosity @ 40 0C                                mm2 /s           

ASTM D-445

34

48

69

99

5.        

Viscosity Index

ASTM D-2270

77

78

80

80

6.        

TAN  (mg KOH/g)

ASTM D-974

0.51

0.52

0.53

0.53

7.        

Pour Point ᵒC                

ASTM D-97

-37

-37

-37

-32

 

 

 

 

Health and Safety Environment:

Extended and repetitive contact of hydraulic oil with skin may cause skin disorder, so try to avoid such contacts as much as an individual (you) can. If it happens, then wash with soap and water. Strictly prohibited to discharge used hydraulic oil in drains or freshwater streams. Disposal of used oil should be in pre-designated or authorized collection points.